Multiport Swivel Joints allow multiple flows across a common rotational axis. Built to order from 316L Stainless Steel, Carbon Steel or any other material as application requires. Bespoke … [Read More]
Welcome to Rotaflow
Multiport
F Series Swivel Joints
F Series 1/4” to 2”
With a pressure rating up to 300 bar as standard this smaller range of swivel joints in carbon steel come with BSPP threads male to female either straight or 90 degrees. Datasheet - F series - … [Read More]
SK Series 1″ to 6″
Ranging in size from DN 25 (1”) to DN 150 (6” nominal bore) the SK series can be supplied with most available end fittings. Threaded Swivels, BSPT, BSPP, NPT etc are often supplied up to DN 80 (3"). Flanges, Hubs and Hammer Lug Unions are available … [Read More]
High Pressure
High Pressure Swivel Joints for applications up to 1379 Bar (20,000 PSI). Spherical Roller Thrust Bearing with capacity or all load requirements. To ISO 13628 (API 17D) and ISO 10423 (API 6A) as … [Read More]
FS Series Swivel Joints
FS Series 1/4” to 2”
Available from stock in 316L Stainless Steel in sizes up to 2" BSPP. Full vacuum to 410 Bar (6000 PSI). Nitrile, Fluorocarbon (Viton®) or PTFE seals. Greasable or Submerged/Sealed for life … [Read More}
Large Bore
Normally supplied with flanged fittings these larger swivel joints can be made from a range of materials with the option of welded overlay material on the seal and bearing surfaces to keep costs low. Styles - Tech spec 118 Large bore - Tech … [Read More]
Compact Duty Swivel Joints
The Compact Duty Swivel Joint is based designed around industry standard ASME 16.5 150lb Raised Face Flange dimensions. Available as standard from A105 Carbon Steel or 316L Stainless Steel, it is possible to re-drill to match other flanges standards. Other materials available on … [Read More]
News & Previous Projects
Refurbished Swivel for Ffestigniog & Welsh Railways
After 17 years of use on a water tower at the Ffestigniog & Welsh Railways, Rotaflow was contacted by Matt, with some photos of the very well-used S1855 8" Carbon Steel swivel joint. He wanted to chat about the options for an overhaul or … [Read More...]
Rotaflow Designed Fire Suppression Pipe System for Canada Steamship Lines’ Bulk Carrier
Following the successful design, manufacture and installation of previous tailored solutions to supply water for fire suppression systems on bulk carrying vessels, Rotaflow were once more tasked with finding a workable solution for specific … [Read More...]
Seanic Ocean System Bespoke Swivel Joint Replacement
Rotaflow were contacted by Seanic Ocean Systems at the end of October 2021 to see if we could offer a bespoke swivel joint to replace an existing unit made by another company. The existing unit had worn out and needed to be replaced and … [Read More...]